High Speed Stereovision Setup for Position and Motion Estimation of Fertilizer Particles Leaving a Centrifugal Spreader - Institut Agro Dijon Accéder directement au contenu
Article Dans Une Revue Sensors Année : 2014

High Speed Stereovision Setup for Position and Motion Estimation of Fertilizer Particles Leaving a Centrifugal Spreader

Résumé

A 3D imaging technique using a high speed binocular stereovision system was developed in combination with corresponding image processing algorithms for accurate determination of the parameters of particles leaving the spinning disks of centrifugal fertilizer spreaders. Validation of the stereo-matching algorithm using a virtual 3D stereovision simulator indicated an error of less than 2 pixels for 90% of the particles. The setup was validated using the cylindrical spread pattern of an experimental spreader. A 2D correlation coefficient of 90% and a Relative Error of 27% was found between the experimental results and the (simulated) spread pattern obtained with the developed setup. In combination with a ballistic flight model, the developed image acquisition and processing algorithms can enable fast determination and evaluation of the spread pattern which can be used as a tool for spreader design and precise machine calibration.
Fichier principal
Vignette du fichier
HIJAZI 2014 Sensors-14-21466_1.pdf (656.83 Ko) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte
Loading...

Dates et versions

hal-01774335 , version 1 (27-05-2020)

Licence

Paternité

Identifiants

Citer

Bilal Hijazi, Simon Cool, Jürgen Vangeyte, Koen C. Mertens, Frédéric Cointault, et al.. High Speed Stereovision Setup for Position and Motion Estimation of Fertilizer Particles Leaving a Centrifugal Spreader. Sensors, 2014, 14 (11), pp.21466 - 21482. ⟨10.3390/s141121466⟩. ⟨hal-01774335⟩
47 Consultations
70 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More